Red Hat Enterprise Linux 3 Update 3 Release Notes (Itanium® Edition)


Introduction

The following topics are covered in this document:

  • Changes to the Red Hat Enterprise Linux installation program (Anaconda)

  • General information

  • Changes to drivers and hardware support

  • Changes to packages

Changes to the Red Hat Enterprise Linux Installation Program (Anaconda)

The following section includes information specific to the Red Hat Enterprise Linux installation program, Anaconda.

Note

In order to upgrade an already-installed Red Hat Enterprise Linux 3 system to Update 3, you must use Red Hat Network to update those packages that have changed. The use of Anaconda to upgrade to Update 3 is not supported.

Use Anaconda only to perform a fresh install of Red Hat Enterprise Linux 3 Update 3.

  • If you are copying the contents of the Red Hat Enterprise Linux 3 Update 3 CD-ROMs (in preparation for a network-based installation, for example) be sure you copy the CD-ROMs for the operating system only. Do not copy the Extras CD-ROM, or any of the layered product CD-ROMs, as this will overwrite files necessary for Anaconda's proper operation.

    These CD-ROMs must be installed after Red Hat Enterprise Linux has been installed.

General Information

This section contains general information not specific to any other section of this document.

  • Red Hat Enterprise Linux 3 Update 3 adds the most recent version of the KornShell (ksh) to the Red Hat Enterprise Linux Extras CD. KornShell is a shell programming language for both interactive and shell script use, and is upward compatible with the Bourne Shell (sh).

    The new ksh package is an optional alternative to pdksh, which is already included in the core distribution. It is useful in circumstances where precise compatibility with AT&T ksh semantics is required.

  • The autofs package, which controls the operation of the automount daemons running on Red Hat Enterprise Linux, has been updated to version 4. This update provides full backward compatibility with version 3. Additionally, it adds the following features:

    • Browsable mounts (ghosting) — Ghosting of map directories allows you to see the directories in the autofs map without mounting them. When they are accessed (such as when a directory listing is requested) the map entry is mounted so that it is seen.

    • Replicated Server support — Replicated server functionality allows the administrator to specify map entries that point to multiple, replicated servers. The automount daemon attempts to determine the best server to use for mounts by testing the latency of an rpc_ping to each available server. Weights may also be assigned to the servers, allowing for more administrator control. Refer to the /usr/share/doc/autofs-4.1.3/README.replicated-server file for additional map format information.

    • Executable maps — A map can now be marked as executable. The initscript that parses the auto.master map passes this as a program map to the auto-mounter. A program map is called as a script with the key as an argument. It may return no lines of output if there is an error, or one or more lines containing a map (with \ quoting line breaks). This feature is useful for implementing /net functionality.

    • Multi-mounts — This feature allows the automount daemon to seek multiple lookup methods in succession. For example, a lookup could query NIS and file maps.

  • The version of the httpd Web server included as part of Red Hat Enterprise Linux 3 Update 3 includes several significant changes:

    • The mod_cgi module has been enhanced to correctly handle concurrent output on stderr and stdout

    • SSL environment variables defined by mod_ssl can be used directly from mod_rewrite using the %{SSL:...} syntax. For example, "%{SSL:SSL_CIPHER_USEKEYSIZE}" may expand to "128".

      Similarly, SSL environment variables can be used directly from mod_headers using the %{...}s syntax.

    • The mod_ext_filter module is now included

    • The minimal acceptable group id that will be used by suexec has been lowered from 500 to 100. This allows the use of suexec with users belonging to the "users" group.

  • Red Hat Enterprise Linux 3 Update 3 includes a new disk dump facility that can serve as an alternative to, (or in addition to) the Red Hat netdump facility.

    When the disk dump facility is configured and enabled, upon a system crash, the contents of memory will be written to the configured disk location. Upon reboot, the data will be copied from the configured disk location and formatted into a vmcore file. This file is identical in nature to files created by the netdump facility, and is stored in a unique subdirectory of /var/crash/. The vmcore file may then be analyzed using the crash(8) utility.

    Currently, only x86- or IA64-based systems with SCSI subsystems that use the aic7xxx, aic79xx, or MPT Fusion drivers are supported. In addition, the disk dump facility requires the dedication of a disk device or partition large enough to contain all of physical memory. This disk space must be configured and preformatted before use. After doing so, the disk dump facility can then be enabled using chkconfig, and the service started.

    The kernel modules required for the disk dump facility are included with the Red Hat Enterprise Linux 3 Update 3 kernel. The associated user-space package is named diskdumputils and, like the netdump user-space package, is installed by default.

    For more information, refer to the following resources:

    • /usr/share/doc/diskdumputils-0.4.0-0/README

    • diskdumpfmt(8) man page

    • diskdumpctl(8) man page

    • savecore(8) man page

Changes to Drivers and Hardware Support

This update includes bug fixes for a number of drivers. The more significant driver updates are listed below. In some cases, the original driver has been preserved under a different name, and is available as a non-default alternative for organizations that wish to migrate their driver configuration to the latest versions at a later time.

Note

The migration to the latest drivers should be completed before the next Red Hat Enterprise Linux update is applied, because in most cases only one older-revision driver will be preserved for each update.

These release notes also indicate which older-revision drivers have been removed from this kernel update. These drivers have the base driver name with the revision digits appended; for example, megaraid_2002.o. You must remove these drivers from /etc/modules.conf before installing this kernel update.

Keep in mind that the only definitive way to determine what drivers are being used is to review the contents of /etc/modules.conf. Use of the lsmod command is not a substitute for examining this file.

Adaptec RAID (aacraid driver)

  • The aacraid driver has been updated from 1.1.2 to 1.1.5-2339

  • The new driver is scsi/aacraid/aacraid.o

  • The older driver has been preserved as addon/aacraid_10102/aacraid_10102.o

LSI Logic RAID (megaraid driver)

Note

The megaraid2 driver includes support for a number of new host bus adapters (certain PERC4 and Serial ATA products) that are not supported by the megaraid driver. If your system contains these newer products exclusively, the megaraid2 driver is loaded by default. If you have the older products exclusively, the megaraid driver will continue to be the default.

However, if you have a mix of old and new MegaRAID adapters, then the driver that is selected depends on the order in which the adapters are scanned. (Note that you cannot have both the megaraid and megaraid2 drivers loaded at the same time.) If the default driver on your system is not the desired one, take one of the following actions:

  • If you are installing the system, type the following command at the boot prompt:

    
    expert noprobe
    
              

    Next, select the desired driver from the subsequent menu.

  • If the system is already installed, edit /etc/modules.conf and change the "alias scsi_hostadapter" lines referring to the megaraid or the megaraid2 driver to the desired driver. Note that after making any changes to /etc/modules.conf you must rebuild the initrd image; refer to the mkinitrd man page for further details.

  • The megaraid2 driver has been updated from v2.10.1.1 to v2.10.6-RH1

  • The new driver is scsi/megaraid2.o

  • The older driver has been preserved as addon/megaraid_2101/megaraid2101.o

  • The v2.00.9 driver has been removed

  • The default driver remains the v1.18k driver (megaraid.o)

IBM ServeRAID (ips driver)

  • The ips driver has been updated from 6.11.07 to 7.00.15

  • The new driver is scsi/ips.o

  • The older driver has been preserved as addon/ips_61107/ips_61107.o

  • The ips 6.10.52 driver (ips_61052.o) has been removed

LSI Logic MPT Fusion (mpt* drivers)

  • These drivers have been updated from 2.05.11.03 to 2.05.16

  • The new drivers are located in message/fusion/

  • The older drivers have been preserved in addon/fusion_20511

  • The 2.05.05+ drivers (mpt*_20505.o) have been removed

Compaq SA53xx Controllers (cciss driver)

  • The cciss driver has been updated from 2.4.50.RH1 to v2.4.52.RH1

QLogic Fibre Channel (qla2xxx driver)

  • These drivers have been updated from 6.07.02-RH2 to 7.00.03-RH1

  • The new drivers are located in addon/qla2200

  • The older driver has been preserved in addon/qla2200_60702RH2

  • The 6.06.00b11 drivers (qla2*00_60600b11.o) have been removed

Note

The QLA2100 adapter has been retired by QLogic. This adapter is no longer supported by QLogic or Red Hat. Therefore, the driver is located in the kernel-unsupported package.

Emulex Fibre Channel (lpfc driver)

  • This driver has been added to the distribution. The version is 7.0.3

  • The driver is located in addon/lpfc

Intel PRO/1000 (e1000 driver)

  • This driver has been updated from 5.2.30.1-k1 to 5.2.52-k3

Intel PRO/100 (e100 driver)

  • This driver has been updated from version 2.3.30-k1 to 2.3.43-k1

Broadcom Tigon3 (tg3 driver)

  • This driver has been updated from v3.1 to v3.6RH

Changes to Packages

This section contains listings of packages that have been updated, added, or removed from Red Hat Enterprise Linux 3 as part of Update 3. Packages that have been built for multiple architectures are listed with the target architecture in parentheses.

Note

These package lists include packages from all variants of Red Hat Enterprise Linux 3. Your system may not include every one of the packages listed here.

The following packages have been updated from Red Hat Enterprise Linux 3 Update 2:

  • ImageMagick

  • ImageMagick-c++

  • ImageMagick-c++-devel

  • ImageMagick-devel

  • ImageMagick-perl

  • MAKEDEV

  • XFree86

  • XFree86-100dpi-fonts

  • XFree86-75dpi-fonts

  • XFree86-ISO8859-14-100dpi-fonts

  • XFree86-ISO8859-14-75dpi-fonts

  • XFree86-ISO8859-15-100dpi-fonts

  • XFree86-ISO8859-15-75dpi-fonts

  • XFree86-ISO8859-2-100dpi-fonts

  • XFree86-ISO8859-2-75dpi-fonts

  • XFree86-ISO8859-9-100dpi-fonts

  • XFree86-ISO8859-9-75dpi-fonts

  • XFree86-Mesa-libGL (i386)

  • XFree86-Mesa-libGL (ia64)

  • XFree86-Mesa-libGLU (i386)

  • XFree86-Mesa-libGLU (ia64)

  • XFree86-Xnest

  • XFree86-Xvfb

  • XFree86-base-fonts

  • XFree86-cyrillic-fonts

  • XFree86-devel

  • XFree86-doc

  • XFree86-font-utils

  • XFree86-libs (i386)

  • XFree86-libs (ia64)

  • XFree86-libs-data

  • XFree86-sdk

  • XFree86-syriac-fonts

  • XFree86-tools

  • XFree86-truetype-fonts

  • XFree86-twm

  • XFree86-xauth

  • XFree86-xdm

  • XFree86-xfs

  • anaconda

  • anaconda-runtime

  • arpwatch

  • at

  • autofs

  • bash

  • bind

  • bind-chroot

  • bind-devel

  • bind-utils

  • bison

  • cdda2wav

  • cdrecord

  • cdrecord-devel

  • chkconfig

  • comps

  • control-center

  • cpp

  • crash

  • cups

  • cups-devel

  • cups-libs

  • cvs

  • dev

  • dhclient

  • dhcp

  • dhcp-devel

  • eclipse

  • elfutils

  • elfutils-devel

  • elfutils-libelf

  • elfutils-libelf-devel

  • ethereal

  • ethereal-gnome

  • ethtool

  • expect

  • expect-devel

  • expectk

  • file-roller

  • gcc

  • gcc-c++

  • gcc-g77

  • gcc-gnat

  • gcc-java

  • gcc-objc

  • gdb

  • glibc (i686)

  • glibc (ia64)

  • glibc-common

  • glibc-debug

  • glibc-devel

  • glibc-headers

  • glibc-kernheaders

  • glibc-profile

  • glibc-utils

  • gnome-panel

  • grep

  • gtk+

  • gtk+-devel

  • gtkhtml3

  • gtkhtml3-devel

  • httpd

  • httpd-devel

  • hwdata

  • imap

  • imap-devel

  • imap-utils

  • initscripts

  • itcl

  • jpackage-utils

  • kdelibs

  • kdelibs-devel

  • kernel

  • kernel-doc

  • kernel-source

  • kernel-unsupported

  • kernel-utils

  • krb5-devel

  • krb5-libs (i386)

  • krb5-libs (ia64)

  • krb5-server

  • krb5-workstation

  • laus

  • laus-devel

  • lha

  • libcap

  • libcap-devel

  • libf2c

  • libgcc (i386)

  • libgcc (ia64)

  • libgcj (i386)

  • libgcj (ia64)

  • libgcj-devel

  • libgnat

  • libgtop2

  • libgtop2-devel

  • libobjc

  • libpcap

  • libpng

  • libpng-devel

  • libpng10

  • libpng10-devel

  • libstdc++ (i386)

  • libstdc++ (ia64)

  • libstdc++-devel

  • lvm

  • mdadm

  • metacity

  • mkisofs

  • mod_auth_pgsql

  • mod_authz_ldap

  • mod_ssl

  • modutils

  • modutils-devel

  • ncompress

  • net-snmp

  • net-snmp-devel

  • net-snmp-perl

  • net-snmp-utils

  • nfs-utils

  • nptl-devel

  • nscd

  • nss_ldap

  • ntp

  • ntsysv

  • openldap

  • openldap-clients

  • openldap-devel

  • openldap-servers

  • openmotif

  • openmotif-devel

  • openssl (i686)

  • openssl (ia64)

  • openssl-devel

  • openssl-perl

  • pam

  • pam-devel

  • parted

  • parted-devel

  • passwd

  • perl

  • perl-CGI

  • perl-CPAN

  • perl-DB_File

  • perl-suidperl

  • php

  • php-devel

  • php-imap

  • php-ldap

  • php-mysql

  • php-odbc

  • php-pgsql

  • popt

  • postfix

  • ppp

  • procps

  • pvm

  • pvm-gui

  • qt

  • qt-MySQL

  • qt-ODBC

  • qt-PostgreSQL

  • qt-designer

  • qt-devel

  • rdist

  • readline

  • readline-devel

  • redhat-config-bind

  • redhat-config-kickstart

  • redhat-config-network

  • redhat-config-network-tui

  • redhat-config-proc

  • redhat-config-securitylevel

  • redhat-config-securitylevel-tui

  • rh-postgresql

  • rh-postgresql-contrib

  • rh-postgresql-devel

  • rh-postgresql-docs

  • rh-postgresql-jdbc

  • rh-postgresql-libs

  • rh-postgresql-pl

  • rh-postgresql-python

  • rh-postgresql-server

  • rh-postgresql-tcl

  • rh-postgresql-test

  • rhnlib

  • rhpl

  • rp-pppoe

  • rpm

  • rpm-build

  • rpm-devel

  • rpm-python

  • rpmdb-redhat

  • rsync

  • rusers

  • rusers-server

  • samba

  • samba-client

  • samba-common

  • samba-swat

  • schedutils

  • sendmail

  • sendmail-cf

  • sendmail-devel

  • sendmail-doc

  • shadow-utils

  • squid

  • squirrelmail

  • strace

  • sysklogd

  • sysstat

  • tcl

  • tcl-devel

  • tcl-html

  • tcllib

  • tclx

  • tcpdump

  • tix

  • tk

  • tk-devel

  • tux

  • unixODBC

  • unixODBC-devel

  • unixODBC-kde

  • up2date

  • up2date-gnome

  • utempter

  • vixie-cron

  • xemacs

  • xemacs-el

  • xemacs-info

  • xinetd

  • xscreensaver

  • ypserv

The following packages have been added to Red Hat Enterprise Linux 3 Update 3:

  • XFree86-devel (i386)

  • anacron

  • atk (i386)

  • authd

  • bash (i386)

  • bind-libs

  • bootparamd

  • bridge-utils (i386)

  • compat-db (i386)

  • compat-gcc (i386)

  • compat-gcc-c++ (i386)

  • compat-libstdc++-devel (i386)

  • cracklib (i386)

  • cups-libs (i386)

  • cyrus-sasl (i386)

  • diskdumputils

  • eal3-certification

  • eal3-certification-doc

  • eclipse-lomboz

  • eclipse-rhaps-develserver

  • elfutils-libelf (i386)

  • emacspeak

  • evolution-connector

  • festival

  • gdb (i386)

  • gdbm (i386)

  • glib (i386)

  • glib2 (i386)

  • glibc-devel (i386)

  • gtk2 (i386)

  • krbafs (i386)

  • laus-libs (i386)

  • laus-libs (ia64)

  • libacl (i386)

  • libart_lgpl (i386)

  • libattr (i386)

  • libcap (i386)

  • libcap-devel (i386)

  • libjpeg (i386)

  • libobjc (i386)

  • libpng (i386)

  • libstdc++-devel (i386)

  • libtermcap (i386)

  • libtiff (i386)

  • ncurses-devel (i386)

  • nss_db (i386)

  • nss_db (ia64)

  • nss_ldap (i386)

  • openldap (i386)

  • openmotif (i386)

  • openoffice.org

  • openoffice.org-i18n

  • openoffice.org-libs

  • openssl096b (i386)

  • pam (i386)

  • pam-devel (i386)

  • pam_krb5 (i386)

  • pam_smb (i386)

  • pango (i386)

  • popt (i386)

  • prelink

  • qt-config

  • readline (i386)

  • redhat-lsb (i386)

  • samba (i386)

  • strace (i386)

  • tcl (i386)

  • tclx (i386)

  • tk (i386)

  • zlib-devel (i386)

The following packages have been removed from Red Hat Enterprise Linux 3 Update 3:

  • java-javadoc

( ia64 )